From 3fd785654372d493c031d9b541ab33a881023a32 Mon Sep 17 00:00:00 2001
From: Andrew Dolgov <noreply@fakecake.org>
Date: Fri, 26 Feb 2021 19:16:17 +0300
Subject: * switch to composer for qrcode and otp dependencies * move most
 OTP-related stuff into userhelper * remove old phpqrcode and otphp libraries

---
 vendor/thecodingmachine/safe/generated/zlib.php | 611 ++++++++++++++++++++++++
 1 file changed, 611 insertions(+)
 create mode 100644 vendor/thecodingmachine/safe/generated/zlib.php

(limited to 'vendor/thecodingmachine/safe/generated/zlib.php')

diff --git a/vendor/thecodingmachine/safe/generated/zlib.php b/vendor/thecodingmachine/safe/generated/zlib.php
new file mode 100644
index 000000000..4dc3ca94f
--- /dev/null
+++ b/vendor/thecodingmachine/safe/generated/zlib.php
@@ -0,0 +1,611 @@
+<?php
+
+namespace Safe;
+
+use Safe\Exceptions\ZlibException;
+
+/**
+ * Incrementally deflates data in the specified context.
+ *
+ * @param resource $context A context created with deflate_init.
+ * @param string $data A chunk of data to compress.
+ * @param int $flush_mode One of ZLIB_BLOCK,
+ * ZLIB_NO_FLUSH,
+ * ZLIB_PARTIAL_FLUSH,
+ * ZLIB_SYNC_FLUSH (default),
+ * ZLIB_FULL_FLUSH, ZLIB_FINISH.
+ * Normally you will want to set ZLIB_NO_FLUSH to
+ * maximize compression, and ZLIB_FINISH to terminate
+ * with the last chunk of data. See the zlib manual for a
+ * detailed description of these constants.
+ * @return string Returns a chunk of compressed data.
+ * @throws ZlibException
+ *
+ */
+function deflate_add($context, string $data, int $flush_mode = ZLIB_SYNC_FLUSH): string
+{
+    error_clear_last();
+    $result = \deflate_add($context, $data, $flush_mode);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Initializes an incremental deflate context using the specified
+ * encoding.
+ *
+ * Note that the window option here only sets the window size
+ * of the algorithm, differently from the zlib filters where the same parameter
+ * also sets the encoding to use; the encoding must be set with the
+ * encoding parameter.
+ *
+ * Limitation: there is currently no way to set the header information on a GZIP
+ * compressed stream, which are set as follows: GZIP signature
+ * (\x1f\x8B); compression method (\x08
+ * == DEFLATE); 6 zero bytes; the operating system set to the current system
+ * (\x00 = Windows, \x03 = Unix, etc.)
+ *
+ * @param int $encoding One of the ZLIB_ENCODING_* constants.
+ * @param array $options An associative array which may contain the following elements:
+ *
+ *
+ * level
+ *
+ *
+ * The compression level in range -1..9; defaults to -1.
+ *
+ *
+ *
+ *
+ * memory
+ *
+ *
+ * The compression memory level in range 1..9; defaults to 8.
+ *
+ *
+ *
+ *
+ * window
+ *
+ *
+ * The zlib window size (logarithmic) in range 8..15; defaults to 15.
+ *
+ *
+ *
+ *
+ * strategy
+ *
+ *
+ * One of ZLIB_FILTERED,
+ * ZLIB_HUFFMAN_ONLY, ZLIB_RLE,
+ * ZLIB_FIXED or
+ * ZLIB_DEFAULT_STRATEGY (the default).
+ *
+ *
+ *
+ *
+ * dictionary
+ *
+ *
+ * A string or an array of strings
+ * of the preset dictionary (default: no preset dictionary).
+ *
+ *
+ *
+ *
+ *
+ * The compression level in range -1..9; defaults to -1.
+ *
+ * The compression memory level in range 1..9; defaults to 8.
+ *
+ * The zlib window size (logarithmic) in range 8..15; defaults to 15.
+ *
+ * One of ZLIB_FILTERED,
+ * ZLIB_HUFFMAN_ONLY, ZLIB_RLE,
+ * ZLIB_FIXED or
+ * ZLIB_DEFAULT_STRATEGY (the default).
+ *
+ * A string or an array of strings
+ * of the preset dictionary (default: no preset dictionary).
+ * @return resource Returns a deflate context resource (zlib.deflate) on
+ * success.
+ * @throws ZlibException
+ *
+ */
+function deflate_init(int $encoding, array $options = null)
+{
+    error_clear_last();
+    $result = \deflate_init($encoding, $options);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Closes the given gz-file pointer.
+ *
+ * @param resource $zp The gz-file pointer. It must be valid, and must point to a file
+ * successfully opened by gzopen.
+ * @throws ZlibException
+ *
+ */
+function gzclose($zp): void
+{
+    error_clear_last();
+    $result = \gzclose($zp);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+}
+
+
+/**
+ * This function compresses the given string using the ZLIB
+ * data format.
+ *
+ * For details on the ZLIB compression algorithm see the document
+ * "ZLIB Compressed Data Format
+ * Specification version 3.3" (RFC 1950).
+ *
+ * @param string $data The data to compress.
+ * @param int $level The level of compression. Can be given as 0 for no compression up to 9
+ * for maximum compression.
+ *
+ * If -1 is used, the default compression of the zlib library is used which is 6.
+ * @param int $encoding One of ZLIB_ENCODING_* constants.
+ * @return string The compressed string.
+ * @throws ZlibException
+ *
+ */
+function gzcompress(string $data, int $level = -1, int $encoding = ZLIB_ENCODING_DEFLATE): string
+{
+    error_clear_last();
+    $result = \gzcompress($data, $level, $encoding);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * This function returns a decoded version of the input
+ * data.
+ *
+ * @param string $data The data to decode, encoded by gzencode.
+ * @param int $length The maximum length of data to decode.
+ * @return string The decoded string.
+ * @throws ZlibException
+ *
+ */
+function gzdecode(string $data, int $length = null): string
+{
+    error_clear_last();
+    if ($length !== null) {
+        $result = \gzdecode($data, $length);
+    } else {
+        $result = \gzdecode($data);
+    }
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * This function compresses the given string using the DEFLATE
+ * data format.
+ *
+ * For details on the DEFLATE compression algorithm see the document
+ * "DEFLATE Compressed Data Format
+ * Specification version 1.3" (RFC 1951).
+ *
+ * @param string $data The data to deflate.
+ * @param int $level The level of compression. Can be given as 0 for no compression up to 9
+ * for maximum compression. If not given, the default compression level will
+ * be the default compression level of the zlib library.
+ * @param int $encoding One of ZLIB_ENCODING_* constants.
+ * @return string The deflated string.
+ * @throws ZlibException
+ *
+ */
+function gzdeflate(string $data, int $level = -1, int $encoding = ZLIB_ENCODING_RAW): string
+{
+    error_clear_last();
+    $result = \gzdeflate($data, $level, $encoding);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * This function returns a compressed version of the input
+ * data compatible with the output of the
+ * gzip program.
+ *
+ * For more information on the GZIP file format, see the document:
+ * GZIP file format specification
+ * version 4.3 (RFC 1952).
+ *
+ * @param string $data The data to encode.
+ * @param int $level The level of compression. Can be given as 0 for no compression up to 9
+ * for maximum compression. If not given, the default compression level will
+ * be the default compression level of the zlib library.
+ * @param int $encoding_mode The encoding mode. Can be FORCE_GZIP (the default)
+ * or FORCE_DEFLATE.
+ *
+ * Prior to PHP 5.4.0, using FORCE_DEFLATE results in
+ * a standard zlib deflated string (inclusive zlib headers) after a gzip
+ * file header but without the trailing crc32 checksum.
+ *
+ * In PHP 5.4.0 and later, FORCE_DEFLATE generates
+ * RFC 1950 compliant output, consisting of a zlib header, the deflated
+ * data, and an Adler checksum.
+ * @return string The encoded string.
+ * @throws ZlibException
+ *
+ */
+function gzencode(string $data, int $level = -1, int $encoding_mode = FORCE_GZIP): string
+{
+    error_clear_last();
+    $result = \gzencode($data, $level, $encoding_mode);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Gets a (uncompressed) string of up to length - 1 bytes read from the given
+ * file pointer. Reading ends when length - 1 bytes have been read, on a
+ * newline, or on EOF (whichever comes first).
+ *
+ * @param resource $zp The gz-file pointer. It must be valid, and must point to a file
+ * successfully opened by gzopen.
+ * @param int $length The length of data to get.
+ * @return string The uncompressed string.
+ * @throws ZlibException
+ *
+ */
+function gzgets($zp, int $length = null): string
+{
+    error_clear_last();
+    if ($length !== null) {
+        $result = \gzgets($zp, $length);
+    } else {
+        $result = \gzgets($zp);
+    }
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Identical to gzgets, except that
+ * gzgetss attempts to strip any HTML and PHP
+ * tags from the text it reads.
+ *
+ * @param resource $zp The gz-file pointer. It must be valid, and must point to a file
+ * successfully opened by gzopen.
+ * @param int $length The length of data to get.
+ * @param string $allowable_tags You can use this optional parameter to specify tags which should not
+ * be stripped.
+ * @return string The uncompressed and stripped string.
+ * @throws ZlibException
+ *
+ */
+function gzgetss($zp, int $length, string $allowable_tags = null): string
+{
+    error_clear_last();
+    if ($allowable_tags !== null) {
+        $result = \gzgetss($zp, $length, $allowable_tags);
+    } else {
+        $result = \gzgetss($zp, $length);
+    }
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * This function inflates a deflated string.
+ *
+ * @param string $data The data compressed by gzdeflate.
+ * @param int $length The maximum length of data to decode.
+ * @return string The original uncompressed data.
+ *
+ * The function will return an error if the uncompressed data is more than
+ * 32768 times the length of the compressed input data
+ * or more than the optional parameter length.
+ * @throws ZlibException
+ *
+ */
+function gzinflate(string $data, int $length = 0): string
+{
+    error_clear_last();
+    $result = \gzinflate($data, $length);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Reads to EOF on the given gz-file pointer from the current position and
+ * writes the (uncompressed) results to standard output.
+ *
+ * @param resource $zp The gz-file pointer. It must be valid, and must point to a file
+ * successfully opened by gzopen.
+ * @return int The number of uncompressed characters read from gz
+ * and passed through to the input.
+ * @throws ZlibException
+ *
+ */
+function gzpassthru($zp): int
+{
+    error_clear_last();
+    $result = \gzpassthru($zp);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Sets the file position indicator of the given gz-file pointer to the
+ * beginning of the file stream.
+ *
+ * @param resource $zp The gz-file pointer. It must be valid, and must point to a file
+ * successfully opened by gzopen.
+ * @throws ZlibException
+ *
+ */
+function gzrewind($zp): void
+{
+    error_clear_last();
+    $result = \gzrewind($zp);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+}
+
+
+/**
+ * This function uncompress a compressed string.
+ *
+ * @param string $data The data compressed by gzcompress.
+ * @param int $length The maximum length of data to decode.
+ * @return string The original uncompressed data.
+ *
+ * The function will return an error if the uncompressed data is more than
+ * 32768 times the length of the compressed input data
+ * or more than the optional parameter length.
+ * @throws ZlibException
+ *
+ */
+function gzuncompress(string $data, int $length = 0): string
+{
+    error_clear_last();
+    $result = \gzuncompress($data, $length);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ *
+ *
+ * @param resource $resource
+ * @return int Returns number of bytes read so far.
+ * @throws ZlibException
+ *
+ */
+function inflate_get_read_len($resource): int
+{
+    error_clear_last();
+    $result = \inflate_get_read_len($resource);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Usually returns either ZLIB_OK or ZLIB_STREAM_END.
+ *
+ * @param resource $resource
+ * @return int Returns decompression status.
+ * @throws ZlibException
+ *
+ */
+function inflate_get_status($resource): int
+{
+    error_clear_last();
+    $result = \inflate_get_status($resource);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Incrementally inflates encoded data in the specified context.
+ *
+ * Limitation: header information from GZIP compressed data are not made
+ * available.
+ *
+ * @param resource $context A context created with inflate_init.
+ * @param string $encoded_data A chunk of compressed data.
+ * @param int $flush_mode One of ZLIB_BLOCK,
+ * ZLIB_NO_FLUSH,
+ * ZLIB_PARTIAL_FLUSH,
+ * ZLIB_SYNC_FLUSH (default),
+ * ZLIB_FULL_FLUSH, ZLIB_FINISH.
+ * Normally you will want to set ZLIB_NO_FLUSH to
+ * maximize compression, and ZLIB_FINISH to terminate
+ * with the last chunk of data. See the zlib manual for a
+ * detailed description of these constants.
+ * @return string Returns a chunk of uncompressed data.
+ * @throws ZlibException
+ *
+ */
+function inflate_add($context, string $encoded_data, int $flush_mode = ZLIB_SYNC_FLUSH): string
+{
+    error_clear_last();
+    $result = \inflate_add($context, $encoded_data, $flush_mode);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Initialize an incremental inflate context with the specified
+ * encoding.
+ *
+ * @param int $encoding One of the ZLIB_ENCODING_* constants.
+ * @param array $options An associative array which may contain the following elements:
+ *
+ *
+ * level
+ *
+ *
+ * The compression level in range -1..9; defaults to -1.
+ *
+ *
+ *
+ *
+ * memory
+ *
+ *
+ * The compression memory level in range 1..9; defaults to 8.
+ *
+ *
+ *
+ *
+ * window
+ *
+ *
+ * The zlib window size (logarithmic) in range 8..15; defaults to 15.
+ *
+ *
+ *
+ *
+ * strategy
+ *
+ *
+ * One of ZLIB_FILTERED,
+ * ZLIB_HUFFMAN_ONLY, ZLIB_RLE,
+ * ZLIB_FIXED or
+ * ZLIB_DEFAULT_STRATEGY (the default).
+ *
+ *
+ *
+ *
+ * dictionary
+ *
+ *
+ * A string or an array of strings
+ * of the preset dictionary (default: no preset dictionary).
+ *
+ *
+ *
+ *
+ *
+ * The compression level in range -1..9; defaults to -1.
+ *
+ * The compression memory level in range 1..9; defaults to 8.
+ *
+ * The zlib window size (logarithmic) in range 8..15; defaults to 15.
+ *
+ * One of ZLIB_FILTERED,
+ * ZLIB_HUFFMAN_ONLY, ZLIB_RLE,
+ * ZLIB_FIXED or
+ * ZLIB_DEFAULT_STRATEGY (the default).
+ *
+ * A string or an array of strings
+ * of the preset dictionary (default: no preset dictionary).
+ * @return resource Returns an inflate context resource (zlib.inflate) on
+ * success.
+ * @throws ZlibException
+ *
+ */
+function inflate_init(int $encoding, array $options = null)
+{
+    error_clear_last();
+    $result = \inflate_init($encoding, $options);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Reads a file, decompresses it and writes it to standard output.
+ *
+ * readgzfile can be used to read a file which is not in
+ * gzip format; in this case readgzfile will directly
+ * read from the file without decompression.
+ *
+ * @param string $filename The file name. This file will be opened from the filesystem and its
+ * contents written to standard output.
+ * @param int $use_include_path You can set this optional parameter to 1, if you
+ * want to search for the file in the include_path too.
+ * @return int Returns the number of (uncompressed) bytes read from the file on success
+ * @throws ZlibException
+ *
+ */
+function readgzfile(string $filename, int $use_include_path = 0): int
+{
+    error_clear_last();
+    $result = \readgzfile($filename, $use_include_path);
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
+
+
+/**
+ * Uncompress any raw/gzip/zlib encoded data.
+ *
+ * @param string $data
+ * @param int $max_decoded_len
+ * @return string Returns the uncompressed data.
+ * @throws ZlibException
+ *
+ */
+function zlib_decode(string $data, int $max_decoded_len = null): string
+{
+    error_clear_last();
+    if ($max_decoded_len !== null) {
+        $result = \zlib_decode($data, $max_decoded_len);
+    } else {
+        $result = \zlib_decode($data);
+    }
+    if ($result === false) {
+        throw ZlibException::createFromPhpError();
+    }
+    return $result;
+}
-- 
cgit v1.2.3